Magnetic vent systems

The dryer vent you'll actually clean.

Two magnetic rings replace the foil-hose-and-clamp fight behind your dryer. Ten minutes to fit, once. Fifteen minutes a season after that.

10 min
To install, once
60 day
Money-back guarantee
4-in
Fits standard US duct
4.8★
312 verified reviews
Fits the standard 4-in ductGas or electric10-minute install, once60-day money-back guaranteeFree US shippingShips from a US warehouse
Fits the standard 4-in ductGas or electric10-minute install, once60-day money-back guaranteeFree US shippingShips from a US warehouse
The swap

Same vent. Completely different chore.

Foil hose + clamps

What you have now

  • Drag the machine out to reach a clamp you can't see
  • Screwdriver, torn foil, skinned knuckles
  • The hose crushes flat when you push the dryer back
  • Restricted airflow means two cycles per load
So it gets done once, badly
DryerDock

What it becomes

  • Pull the dryer forward and the coupling releases in your hand
  • No tools after the one-time ten-minute fit
  • Magnets self-align on the way back in — snap, airtight
  • Full airflow restored, so one cycle dries the load
Fifteen minutes, every season
Shop the kitFREE US SHIPPING · 60-DAY GUARANTEE
Fig. 01 — try the mechanism

Drag it apart. It finds its way back.

This is the whole product in one motion: pull the dryer forward and the vent releases in your hand. Push it back and the magnets do the aiming for you.

Fig. 01 — magnetic coupling SNAP SEALED · AIRTIGHT WALL / DUCT B DRYER A DRAG
ADryer-side ring BWall-duct ring
Or drag the dryer left
Why it works

Built around the one thing that stops you

Self-aligning

The magnets find each other in a gap you can't see into. No reaching, no tools.

Airtight seal

Full airflow restored, so a load dries in one cycle instead of two.

Ten-minute fit

One screwdriver, once. After that the vent opens with a pull.

Fire-safety habit

Lint build-up is the leading cause of dryer fires. This makes clearing it easy.

Standard 4-inch duct

Fits nearly every residential US dryer, gas or electric.

60-day guarantee

If it doesn't get your vent cleaned within the hour, send it back.

Installation → maintenance

Ten minutes once. Fifteen minutes a season.

STEP 01 — ONCE

Attach the rings

Ring A on the dryer outlet, Ring B on the wall duct. One screwdriver, ten minutes, one time ever.

STEP 02 — EVERY PUSH

Push back — snap

The magnets self-align in the gap and seat with an airtight seal. You'll hear it land.

STEP 03 — EVERY SEASON

Snap apart, clean, done

Pull the dryer forward and the coupling releases. Vacuum the hose, brush the duct, push back.

~3,000 US house fires / year1

start with clothes dryers — and the leading cause on record is failure to clean.

DryerDock doesn't clean your vent. It removes the reason you don't. When the vent snaps open in seconds, the job that gets skipped for years becomes the easiest chore in the house.

 
 
The question worth being able to answer
"When was the dryer vent last cleaned?"

For most homeowners the honest answer is never — not because they don't care, but because the access made it miserable. Snap the excuse off the back of your dryer.

SHOP NOW

60-day money-back guarantee

Free US shipping

Ships from our US warehouse

American Express Apple Pay Diners ClubDiscoverGoogle Pay KlarnaMaestroMastercard Shop Pay Union PayVisa